YOUR PAVERS CAN BE RESTORED. LET'S FIX THEM.

Paver Stripping in
Jacksonville, FL

American Operator's Locally Owned and Operated Certification

THE ONLY REAL FIX FOR WHITE AND PEELING PAVERS

Why Jacksonville Homeowners Choose Paver Stripping Over a Quick Fix

If your pavers have turned white, look hazy, or have sealer peeling off in sheets, you have a failed seal job on your hands. This is one of the most common paver problems we see across Jacksonville. In most cases a solvent based sealer was applied by an inexperienced contractor using a product from a big box hardware store. Jacksonville’s humidity and high ground moisture level causes solvent based sealers to trap moisture underneath the surface and turn white. Once that process starts it does not stop on its own.

Sealing over a failed coat is never the answer. A new coat of sealer cannot bond to a surface that is already peeling, hazy, or contaminated. The only real fix for failed paver sealer is professional paver stripping in Jacksonville FL. According to the Interlocking Concrete Pavement Institute, proper surface preparation is the most important step in any paver sealing or restoration project. So we fully strip the old product off down to the raw paver surface, replace the joint sand with SEK bonding sand, and start fresh with a commercial grade two coat flood seal system applied the right way.

Find Out What Paver Stripping Costs
See Your Price in 60 Seconds

Can You Strip Your Pavers Yourself or Should You Hire a Professional?

It is possible to buy a stripping chemical from a hardware store and try to remove the old sealer yourself. But without the right product for your specific paver type and the experience to know how long to let the chemical work, most DIY strip jobs only remove part of the old sealer. Sealing over a partially stripped surface creates the same problem all over again within a few months.

DIY paver stripping also carries real risk. The wrong chemical on travertine or natural stone can permanently etch and damage the surface. Stripping chemicals that run off into your pool, onto your landscaping, or against your garage door can cause damage that costs far more to fix than the strip job itself. Without proper surface protection and containment a DIY attempt can turn a fixable problem into a much bigger one.

Professional Paver Stripping in Jacksonville FL

Professional paver stripping starts with identifying the exact type of sealer on your pavers and selecting the right chemical to remove it. Our team covers and protects all surrounding surfaces before any product goes down. We apply the stripping chemical, cover it to maintain proper dwell time, and pressure clean the surface to fully pull the old sealer off down to the raw paver. We then replace all joint sand with SEK bonding sand and apply our two coat commercial flood seal system to restore and protect the surface. One crew. One visit. Fully restored pavers backed by our two year limited workmanship warranty.

Scroll to see full table →

Factor	DIY Stripping	Professional Stripping
Right chemical for your paver type	No	Yes
Surrounding surfaces protected	No	Yes
Full sealer removal guaranteed	No	Yes
Joint sand replaced	No	Yes
Resealed same visit	No	Yes
2-year warranty included	No	Yes

White or peeling pavers?
Get a free paver stripping estimate today.

What Types of Pavers Can Be Stripped?

Different paver surfaces need different stripping chemicals and techniques. Our team looks at your specific paver material first and then selects the right product and approach to match. Here is what that looks like for each surface type.

Brick Pavers

Brick pavers are the most common surface we strip across Jacksonville driveways, patios, and walkways. Failed solvent based sealers on brick are extremely common because brick is one of the most frequently sealed surfaces in the area. Our professional paver stripping process in Jacksonville fully removes the old product from the brick surface and joints without damaging the paver itself. After stripping we replace the joint sand with SEK bonding sand and apply our two coat commercial flood seal to restore and protect the surface.

Concrete Pavers

Concrete pavers are highly porous which means they absorb sealer deeply into the surface. That makes stripping more involved than other paver types. Our commercial grade stripping system is specifically designed to pull the old product out of porous surfaces completely. We take the time to fully remove everything from the surface and joints before our two coat reseal goes down so the new sealer bonds the way it is supposed to.

Travertine Pavers
& Natural Stone

Travertine and natural stone require a gentler stripping chemical and a more careful approach than brick or concrete. Aggressive chemicals or too much pressure can permanently etch natural stone and cause damage that cannot be undone. Our team selects a stone safe stripping agent and applies it carefully to fully remove the failed sealer without causing any surface damage. Because of the additional care required natural stone paver stripping costs more than standard brick or concrete jobs.

Pool Deck Pavers

Pool deck pavers with a failed seal job are one of the most common stripping jobs we handle in Jacksonville. The combination of chlorine exposure, constant water contact, and Florida’s humidity causes poorly applied sealers to fail fast on pool decks. We strip the failed product completely, replace the joint sand, and apply a slip resistant commercial grade two coat seal to restore and protect the surface and keep your pool area safe and clean.

How Does Professional Paver Stripping Work?

Schedule a Free Paver Assessment

Give us a call or fill out the form on this page. We come out to your property, look at your pavers, and identify the type of sealer that failed and how severely it has broken down. From there we put together a clear quote so you know exactly what to expect before any work begins.

Protect All Surrounding Areas

Before any stripping chemical goes down our team covers and tapes off all surrounding surfaces. This includes your landscaping, pool screen, garage door, and any adjacent surfaces that could be affected by the stripping agent or pressure cleaning runoff. When we leave the only thing that looks different is your pavers.

Apply the Stripping Chemical

We apply a professional grade stripping chemical matched to your specific paver type. We cover the treated area to maintain proper dwell time and let the chemical fully penetrate and break down the old sealer from the surface and joints. The dwell time varies based on the type of sealer being removed and how severely it has failed.

Pressure Clean the Surface

Once the stripping chemical has fully broken down the old sealer our team pressure cleans the entire surface to remove everything down to the raw paver. We check every section of the paver area to make sure the surface is completely clean and ready before we move forward. No partial strips. No shortcuts.

Replace the Joint Sand

With the old sealer fully removed we replace all joint sand with SEK bonding sand color matched to your pavers. This step locks your pavers in place, stops weeds and ants from coming back, and prepares the surface for the new sealer to bond correctly from the inside of the joint out.

Apply the New Sealer

After full preparation our team applies a true flood coat of commercial grade sealer that soaks deep into the SEK bonding sand and hardens the joints from the inside. Once that first coat cures we apply a second coat to seal and protect the surface. You choose your finish — natural matte or wet look gloss. That two coat system gives you stronger joints, better stability, and long lasting protection.

Final Walkthrough

Once the sealer is applied we do a full walkthrough of the area with you to make sure everything looks right. We go over dry times and aftercare so you know exactly when the surface is ready for foot and vehicle traffic. The job is not done until you are completely satisfied.

Why Choose Hydro Wash 360 for Paver Stripping in Jacksonville?

A lot of companies in Jacksonville offer paver sealing. Far fewer offer professional paver stripping. And even fewer do it correctly. Here is what sets our work apart from every other option in the area.

We Identify the Sealer Before We Touch Your Pavers

Most companies apply the same stripping chemical to every job regardless of what type of sealer is on the surface or what type of paver they are working on. We assess your pavers first and select the right stripping agent for your specific situation. That step alone is the difference between a clean full strip and a partial removal that fails all over again within months.

We Protect Everything Around Your Pavers

Stripping chemicals are aggressive. They remove paint, damage landscaping, and can contaminate a pool if they are not contained properly. Our team tapes off and covers all surrounding areas before any product goes down. When we leave your property the only thing that looks different is your pavers.

We Do the Full Job in One Visit

Most paver stripping companies only strip. If you want a reseal after that you have to hire someone else or schedule a second visit. At Hydro Wash 360 we handle the stripping, the sand replacement, and the full two coat commercial reseal all in one visit. One crew. One call. No coordinating between contractors.

We Use the Right Products for Jacksonville

We do not use big box store strippers or cheap chemicals that leave residue on the surface. Our stripping agents are professional grade and selected specifically for the type of sealer being removed. After stripping we use SEK bonding sand and a commercial grade two coat flood seal system built for Florida’s heat, humidity, and UV exposure. No shortcuts. No hardware store products. No exceptions.

We Back Every Job With a Two Year Warranty

Most paver stripping companies offer no warranty at all because they are not confident enough in their process to stand behind it. We back every strip and reseal job with our two year limited workmanship warranty. If the new sealer fails because of something we did during the process we come back and fix it at no charge. That is not a policy. That is how we operate on every single job.

Jacksonville's paver stripping specialists are ready.
Get a free quote today.

FREQUENTLY ASKED QUESTIONS

How much does paver stripping cost in Jacksonville?

Paver stripping in Jacksonville typically ranges from $350 for small areas up to $3,400 or more for large properties with severe solvent based sealer failure. The final cost depends on your area size, the type of sealer being removed, and the condition of the existing coat.

What is paver stripping and when do I actually need it?

Paver stripping is the process of fully removing a failed or incorrectly applied sealer from your paver surface before a new coat can go down. You need it when your pavers have turned white or hazy, when the sealer is peeling or bubbling, or when a previous contractor used the wrong product. A standard reseal will not fix these problems on its own.

How do I know if my pavers have a solvent based sealer on them?

The most common signs of a solvent based sealer are a thick glossy or plastic looking finish, a white or milky haze across the surface, visible roller marks, and sealer that is peeling off in large sheets. If your pavers looked great right after sealing but started turning white within the first few months that is almost always a solvent based sealer failing in Jacksonville’s humidity.

Can paver stripping be done on a pool deck?

Yes. Pool deck paver stripping is one of the most common jobs we do in Jacksonville. The combination of chlorine exposure, constant moisture, and Florida’s humidity causes poorly applied sealers to fail fast on pool decks. Our team uses the right stripping chemical for your specific pool deck surface and applies it carefully to protect the surrounding pool area throughout the process.

How many coats of stripper does it take to fully remove the old sealer?

It depends on the type of sealer and how many coats were applied. Most standard water based sealer jobs come off cleanly in one application. Solvent based sealers and surfaces where multiple coats were applied over time may need two applications to fully remove everything down to the raw paver. We never seal over partially stripped surfaces. We make sure the job is done completely before anything new goes down.

Will paver stripping remove the color from my pavers?

No. Stripping removes the sealer coating on top of the paver surface not the color of the paver itself. After stripping your pavers will look raw and natural. Once we apply the new two coat commercial flood seal the color comes back fully and in most cases looks better than it did before the failed seal job was applied.

How long do I have to stay off my pavers during the stripping process?

The entire strip and reseal process takes one full day for most standard jobs. During the stripping phase the chemical needs time to dwell and the pressure cleaning creates wet conditions on the surface. After the new sealer is applied you can walk on the pavers within 24 hours and drive on them within 48 to 72 hours depending on the weather and the product used.

What happens if stripping chemicals get on my driveway border or garage door?

Stripping chemicals are aggressive and will remove paint and other coatings from surfaces they contact. That is exactly why our team covers and tapes off all surrounding areas before any product goes down. We protect your garage door, landscaping, pool screen, and any painted surfaces adjacent to the paver area before we start. Containment is a non-negotiable part of our process on every single job.

Is it cheaper to strip and reseal or just replace the pavers entirely?

Stripping and resealing is almost always significantly cheaper than replacing your pavers. Paver replacement in Jacksonville typically costs $15 to $30 per square foot or more depending on the material. A professional strip and reseal costs a fraction of that and produces a fully restored surface backed by our two year limited workmanship warranty. Replacement is only necessary when the pavers themselves are physically cracked or structurally damaged.

How do I know if my pavers need stripping or just a fresh seal?

If your pavers look white, hazy, or have sealer peeling off in sheets you need stripping first before any new coat can go down. If your pavers just look faded or dull and the old sealer has worn off naturally you likely just need a standard clean and reseal. Not sure which one applies to your property? Use our free Paver Sealing Cost Calculator to get a sealing estimate and compare it against your stripping quote before you decide.