Custom Hardscape. Built to Last.
Paver Installation in
Jacksonville, FL
Custom driveways, patios, pool decks, and walkways. Installed the right way with premium materials, precision base prep, and a 100% satisfaction promise. Trusted by Jacksonville homeowners and custom home builders across Northeast Florida.
3
Paver Crews
1000+
Trusted Homeowners
100%
Customer Satisfaction
Built From the Ground Up
Built to Handle Jacksonville
Why Pavers Are the Smartest Hardscape Investment in Florida
Poured concrete cracks. Asphalt fades. In Jacksonville’s heat, humidity, sandy soil, and heavy rain cycles, rigid slabs are working against the ground beneath them from the day they’re installed. Pavers are different.
Because pavers are installed as individual interlocking units over a compacted aggregate base, they flex with ground movement instead of cracking under it. That means a properly installed paver driveway or patio can last 25 to 50 years with minimal maintenance, while a poured concrete slab typically shows visible cracking within 10 to 15 years in this climate.
Professional paver installation in Jacksonville FL starts long before the first paver is placed. At Hydro Wash 360, our crews build every project the right way, from the base up. Proper excavation. Compacted aggregate. Sand bedding. Precision paver placement. Edge restraints. Locked-in joint sand. No shortcuts. No cutting corners.
And because we already run one of Jacksonville’s most trusted paver sealing operations, we’re the only company in Northeast Florida that can install and seal your pavers in a single coordinated project. One crew. One warranty. One point of contact.
The Right Paver for Your Project
Every material behaves differently under Florida conditions, and choosing the right one comes down to how you’ll use the space, how much sun and water it gets, and the look you’re after.
We install concrete pavers, brick, interlocking pavers, and premium natural stone including travertine and marble. Concrete and interlocking pavers are the workhorses for driveways and everyday patios. Travertine stays noticeably cooler underfoot, which makes it the go-to around pools in Florida sun. Brick brings classic character, and marble and natural stone deliver a high-end custom finish.
Our team walks you through samples during your on-site consultation and helps you land on the right material for your space and budget. No pressure, no upsell — just an honest recommendation based on what actually holds up in Jacksonville’s climate.
Looking for paver installation?
Get a free estimate today.
Where We Install
Custom Paver Installation for Every Outdoor Space
From full custom driveways to backyard pool decks, our team handles residential and commercial paver installations across Jacksonville and Northeast Florida.
Paver Driveways
Custom driveway installations that boost curb appeal and outlast poured concrete. Engineered to handle vehicle loads without shifting or cracking.
Paver Patios
Backyard patios built for Florida entertaining. Custom shapes, borders, and patterns to fit your space and lifestyle.
Pool Deck Pavers
Cool-touch travertine and slip-resistant surfaces designed specifically for pool surrounds. Safe for bare feet, gorgeous by the water.
Walkways & Paths
Front entry walks, garden paths, and side-yard connectors built to last. Design flexibility and custom patterns to complement any home's architecture.
Fire Pit Areas
Custom fire pit surrounds and seating areas built with heat-resistant materials, integrated into the surrounding hardscape.
Outdoor Kitchens
Full outdoor kitchen and entertaining areas with integrated paver flooring, custom cooking surrounds, and built-in bar spaces designed for Florida living.
Pavers vs. Poured Concrete
Why Homeowners Are Choosing Pavers Over Poured Concrete
A poured concrete slab looks the same as pavers on quote day. Five years later, the story is very different.
Poured Concrete
The Cheap Now / Expensive Later Option
Poured concrete is the lower upfront cost, which is why so many contractors push it. But in Jacksonville’s climate, concrete typically shows cracking within 10 to 15 years, and it can’t flex with the ground beneath it. Sandy soil expansion, occasional freeze-thaw, and heavy rain cycles all work against a rigid slab. Once a slab cracks, your only real option is full demolition and replacement. Individual sections cannot be swapped out.
Paver Installation
The Right Way to Build for Florida
Our Installation Process
How Professional Paver Installation Works
Every paver job we build follows the same detailed process. No steps skipped. No corners cut. Here is exactly what happens from the moment you reach out to the moment we finish.
Free Consultation & Design
We come out to your property, measure the space, review your material and pattern options, and put together a clear quote so you know exactly what to expect before any work begins. For complex projects, we can also walk you through paver samples on-site.
Excavation & Site Preparation
Proper excavation is the difference between a paver installation that lasts decades and one that fails in a few years. We remove existing surfaces, excavate to the correct depth for your specific application (driveways require deeper base than patios), and prep the site for the compacted base layer.
Compacted Aggregate Base
We install and compact a crushed stone aggregate base in engineered layers. This is what carries the load in a paver system. Skimping on base depth or compaction is the number one reason paver installations fail — and it's the step most low-bid contractors cut.
Sand Bedding & Paver Placement
A precisely leveled sand bedding layer goes down over the compacted base. Then our crew places every paver by hand, matching your chosen pattern and cutting edge pieces to fit the space perfectly. This is where craftsmanship shows up in the finished product.
Edge Restraints & Compaction
Edge restraints lock the perimeter of your paver installation in place so pavers don't shift or spread over time. We then compact the entire surface with a plate compactor to settle the pavers and lock them into the sand bedding.
Joint Sand & Optional Sealing
We fill the joints with the right sand for your application and finish with a final walkthrough. Want your new pavers sealed for maximum longevity and stain protection? We can handle that in the same project. One crew. One warranty. One point of contact.
Ready to Talk Through Your Paver Project?
Investment
How Much Does Paver Installation Cost in Jacksonville?
Most paver installation in Jacksonville FL falls somewhere between $15 and $40+ per square foot installed, depending on material, project size, site conditions, and design complexity. Premium materials and custom work land at the higher end. Here is what actually drives the number — and why the only way to get a real price is a free on-site quote.
$15 – $40+ / sq ft installed
Material
Concrete pavers are the most affordable. Travertine, marble, and natural stone command a premium.
Project Size
Larger projects benefit from base prep and mobilization efficiency and often price lower per sq ft.
Site Conditions
Existing hardscape removal, drainage work, or challenging soil conditions add to project scope.
Design
Custom borders, patterns, mixed materials, and integrated features like fire pits change the number.
Our Promise
Our 100% Satisfaction Promise
We do not consider a paver installation complete until you have walked the finished area with us and signed off. If something does not look right, we fix it before we leave.
No runaround. No excuses.
Trusted by Custom Homebuilders
Custom Homes · Multi-Family · Property Management — Now Serving Northeast Florida & Beyond
Why Hydro Wash 360
Best Paver Installation Company in Jacksonville FL
A lot of companies offer paver installation in Jacksonville FL. Most of them cut the corners that actually matter. Here is what sets our work apart.
We Do the Base Right. Always.
Ninety percent of paver installation failures trace back to base preparation. We excavate to spec, install compacted aggregate in engineered layers, and level the sand bedding with precision. If we cut corners here, the whole project fails in a few years.
Three Full-Time Paver Crews
We run three dedicated paver crews across Northeast Florida. That means faster scheduling, larger project capacity, and the bandwidth to handle everything from a single patio to a full custom home hardscape package.
The Only Installer That Also Seals
Most paver installers only install. When it’s time to seal your new pavers, you’re hiring someone else. We handle installation and sealing in one project. One crew. One warranty. Zero coordination headaches.
Trusted by Custom Home Builders
A vice president at one of Jacksonville’s premier custom home builders now sends every custom home our way. That kind of endorsement doesn’t happen by accident. It happens by delivering results on the first project — and every one after.
Premium Material Sourcing
We work with the top paver manufacturers in the industry — Belgard, Tremron, and premium natural stone suppliers — so you get material selection that matches your vision and quality that holds up in Florida’s climate.
Protect What Surrounds Your Pavers
Damage to your landscaping, pool equipment, or exterior finishes during a paver install is a common problem with careless contractors. We tape, cover, and protect surrounding areas before we start. When we leave, the only thing that looks different is your new hardscape.
Common Questions
Paver Installation FAQs
How much does paver installation cost in Jacksonville?
Every project is different, so the cost of paver installation in Jacksonville FL depends on material choice, project size, site conditions, and design complexity. Most installations fall between $15 and $40+ per square foot installed, with premium materials like travertine, marble, and natural stone at the higher end. The only way to get an accurate number for your project is a free on-site consultation — we measure the space, review your material options, and give you a clear custom quote with no hidden fees.
How long does paver installation take?
Most residential paver installation projects take between two and seven days depending on size and complexity. A small patio can be completed in two to three days. A full driveway or large multi-area installation may take a full week. We give you a realistic timeline when we confirm your quote so you know exactly what to expect.
Can pavers handle heavy vehicles like trucks?
Absolutely. Interlocking concrete pavers installed over the correct base depth are engineered to distribute vehicle loads across the surface. We install driveways that handle trucks, SUVs, and daily commuter vehicles without shifting, cracking, or settling. The key is base depth and compaction — which is exactly where budget contractors cut corners.
Do you install pavers for custom home builders and property managers?
Yes. We work with custom home builders, general contractors, HOAs, and property management companies across Northeast Florida. We provide scheduled service, clear communication, professional documentation, and the reliability that builder and property management relationships require. Contact us to discuss builder partnerships or property portfolio work.
Do you offer paver installation for pool decks?
Yes. Pool decks are one of our specialties. We install travertine, marble, natural stone, and slip-resistant concrete pavers around pool areas across Jacksonville, Ponte Vedra, St. Johns, and the surrounding communities. Travertine is especially popular for pool decks because it stays cool underfoot even in direct summer sun.
What areas do you serve for paver installation?
We install pavers throughout Jacksonville, Ponte Vedra, Ponte Vedra Beach, St. Johns, St. Augustine, Fleming Island, Orange Park, Middleburg, Fernandina Beach, Amelia Island, Atlantic Beach, Neptune Beach, Jacksonville Beach, Nocatee, Fruit Cove, and surrounding Northeast Florida communities.