SEAL, STRIP, AND RESTORE. JACKSONVILLE PAVER SPECIALISTS.
Paver Sealing in
Jacksonville, FL
Paver Sealing That Holds Up in Florida
Signs Your Pavers Need Sealing
If your pavers have lost their color, feel rough underfoot, or have weeds pushing through the joints, it is not you. It is Florida. The sun bleaches the tops, the rain washes the sand out of the joints, and humidity keeps mildew alive year round. Unsealed pavers do not last long in Jacksonville, Nassau County, or Ponte Vedra without regular sealing.
Once the joint sand washes out, pavers shift, weeds take root, and ants move in. You may also see a white chalky film called efflorescence, which is moisture damage from inside the paver. Heavier damage usually calls for a full paver stripping before a new sealer can bond.
Our crew uses SEK bonding sand and a two coat flood sealer built for Florida, prepping with Surfacelogix products first. The same system works on driveways, patios, pool decks, walkways, and natural stone.
The Interlocking Concrete Pavement Institute recommends resealing every three to five years. Most Jacksonville jobs land in a predictable price range by square footage. Use our paver sealing cost calculator for a fast estimate.
Can I Seal My Pavers Myself or Should I Hire a Professional?
Why DIY Paver Sealing Fails
Most DIY paver sealers come from hardware store shelves and are not commercial grade. They peel, cloud, and trap moisture under the surface within a year. Most DIYers also skip the joint sand replacement or use cheap polymeric sand that crumbles in Florida humidity, and many use bleach to clean the pavers first, which weakens the joints and damages the surface color. Without commercial products, real prep, and the right sand, even the best sealer fails fast.
Why Professional Sealing Lasts
Professional paver sealing starts with the prep, not the sealer. Our crew cleans and neutralizes the pavers with Surfacelogix products, never bleach, then replaces the joint sand with SEK bonding sand in a color that matches your pavers. Once the sand cures, we apply a first flood coat of commercial grade sealer that penetrates the joints and locks the sand in place. A second coat goes on after the first cures, and the two coat system is what holds up against Florida sun and rain for years.
Not sure if your pavers need sealing?
We will walk your property and tell you straight.
What Types of Surfaces Can Be Sealed?
Not every paver takes the same sealer. Brick, concrete, travertine, and pool deck pavers each have their own porosity, texture, and heat tolerance, which changes the product we use and how we apply it. Here is how we handle each one.
Brick
The most common paver material across Jacksonville driveways, patios, and walkways. Fade fast under UV, hold onto algae in the joints, and shift when the sand washes out. Our sealing process restores the original red-brown tone and locks the joints in place.
Concrete
Durable but highly porous, so they absorb oil, grease, and organic stains fast when unsealed. Our sealer penetrates the surface, blocks stain absorption, and holds off UV fade. Concrete pavers also take a wet look or matte finish equally well.
Travertine
A premium natural stone sealing surface used around pools and outdoor living areas. Harsh chemicals etch travertine on contact, so our crew preps with Surfacelogix and applies a stone-safe sealer that protects the color without changing the texture underfoot.
Pool Deck
Constant water exposure, chlorine, and foot traffic wear down pool deck pavers fast. Without sealing, the surface fades, turns slick, and grows algae in the low spots that stay wet. Our sealer holds the color, blocks algae, and finishes with a slip resistant grip that stays safe barefoot.
Wet Look vs. Matte Paver Sealer: Which Finish Is Right for Your Property?
Both finishes use the same commercial grade two coat flood sealer, so the protection level is identical. The choice is about the look you want. Wet look pulls the color deeper and adds a subtle shine. Matte keeps the pavers looking natural and dry. For a full breakdown, see our wet look vs matte paver sealer guide.
Wet Look Sealer
Matte Sealer
Best for: deep color and a glossy finish that looks freshly rained on
Deepens the paver color and adds a soft shine that looks like the surface has just been rained on. Reds and browns come back stronger, and the whole area reads as freshly cleaned. Most homeowners pick this finish for pool decks, entry walkways, and front patios where curb appeal matters.
Best for: natural, untreated appearance with full protection
Protects the pavers without changing how they look. The joint sand still locks in place, the UV protection is the same, and the stains still get blocked, but the surface keeps its natural texture and dry appearance. This finish is the usual choice for travertine, large driveways, and natural stone patios.
- Deepens color and brings out red and brown tones
- Glossy, high-shine finish
- Makes pool decks and patios look freshly cleaned
- Best for entry walkways and front patios where curb appeal matters
- Keeps the natural color and texture of the pavers
- No glossy or wet appearance
- Ideal for travertine and natural stone surfaces
- Same protection as wet look
- Best for large driveways and understated properties
Our paver sealing service is backed by a two year written workmanship warranty that covers sealer failure caused by improper preparation or application.
If the sealer peels or flakes because of our installation error inside the warranty period, we correct the affected areas at no charge.
This warranty does not cover:
- Normal wear in high-traffic areas
- Tire marks or scuffing
- Rust, oil, or chemical stains
- Efflorescence
- Flooding or drainage issues
- Paver movement or settling
- Lack of recommended maintenance
Paver sealing in Florida typically needs to be refreshed every two to three years. We recommend annual cleaning and inspection to keep the warranty valid, and we only use commercial grade sealers and full prep methods on every job.
How Paver Sealing Services Work in Jacksonville
1. Schedule a Free Estimate
Give us a call or fill out the form on this page. Our crew comes to the property to walk the pavers, check the joints, and inspect any existing sealer. From there, you get a clear quote and a real timeline. Want a ballpark before we visit? Try our paver sealing cost calculator for an instant estimate.
2. Deep Clean the Surface
Our crew is Surfacelogix certified and only uses Surfacelogix cleaning products to remove dirt, algae, mold, stains, and failed sealer from previous jobs. We never use bleach. Bleach may look clean for a few weeks, but it weakens the joint material and leaves streaks across the surface. Surfacelogix is the only cleaning system built for professional paver restoration in Florida.
3. Replace the Joint Sand
Once the pavers are clean and dry, our crew replaces the joint sand with SEK bonding sand in a color that matches your paver tone. The wrong sand is one of the biggest reasons DIY paver jobs fail. SEK holds up in Florida humidity, locks the pavers into their original layout, and blocks weeds and ants from establishing in the joints.
4. Apply the Sealer
Our crew applies a true flood coat of commercial grade sealer that soaks into the SEK bonding sand and hardens it in place inside the joints. Once that first coat cures, we come back with a second flood coat to seal the paver surface. The two coat system is what holds up against Florida sun, rain, and stains for the full life of the seal.
5. Final Walkthrough and Dry Time
Our crew walks the property with you to check every section of the sealed surface. We explain the dry times up front, foot traffic in 24 hours, vehicle traffic in 48 to 72 hours, and cover the aftercare that keeps the sealer performing. Every job is backed by our written workmanship warranty.
Best Paver Sealing Company in Jacksonville FL
How Do You Know You Are Hiring
the Right Paver Sealing Company?
Full Prep Before Every Seal
Most sealer failure comes from one thing: crews skipping the prep to squeeze more jobs into a day. When sealer rolls over trapped dirt, algae, or old sealer residue, the coat does not bond and starts peeling within months. Our crew runs the full Surfacelogix cleaning system and joint cleanout on every job, no shortcuts, no bleach.
Commercial Grade Products Only
The commercial grade sealers and Surfacelogix products we use are only sold through certified applicator networks. That is why hardware stores carry consumer-grade sealers that fail in Florida within a year, and why DIY paver jobs almost never last. Buying professional product is a big part of the reason our seals hold up.
One Company for the Entire Job
Some paver contractors subcontract the cleaning to a separate crew, which means the technicians who prep the pavers are not the ones who seal them. Our crew stays the same from the first pass with Surfacelogix through the second flood coat of sealer. When something in the prep affects the seal, the same people who saw it are the ones handling it.
We Protect What Surrounds Your Pavers
Sealer overspray on a garage door, pool screen, or landscaping is one of the most common complaints homeowners have after a paver sealing job. Our crew tapes off every surface within spray range and covers exposed plants before the first coat goes down. Anything that is not a paver stays untouched.
FREQUENTLY ASKED QUESTIONS
How long does paver sealing last?
Paver sealing typically lasts three to five years in Jacksonville, closer to two to three years on driveways and high-traffic patios in full sun. Foot traffic, sun exposure, and Florida rain cycles all shorten the interval. Our two coat flood sealer with SEK bonding sand is built to hold the outer edge of that range, not the shorter one.
Is paver sealing worth it?
Yes, in Jacksonville the math almost always works out for sealing. A full paver replacement runs several thousand dollars and takes weeks. Sealing runs a fraction of that, protects the color, and keeps the joint sand locked in place for years. If your pavers are still structurally sound, sealing extends their life far longer than doing nothing.
What is the best time of year to seal pavers?
The best window for paver sealing in Jacksonville is late fall through early spring. Cooler temperatures and lower humidity let the sealer cure into the SEK bonding sand cleanly, without trapping moisture underneath. Summer jobs can work when the forecast holds, but our crew avoids sealing right before or during heavy rain cycles.
Can you seal old pavers?
Yes, most old pavers can be sealed as long as the surface is still structurally sound. If the pavers are cracked, crumbling, or heavily spalled from years of neglect, sealing will not fix the underlying damage. On pavers that are just faded, dirty, or coated with failed sealer, our crew strips the old material, resets the joint sand, and puts down a fresh two coat seal. Age is not the disqualifier. Condition is.
How much does paver sealing cost in Jacksonville?
Paver sealing cost in Jacksonville depends on the square footage, the condition of the pavers, and whether joint sand needs full replacement. Most residential jobs are priced by square footage, and our on-site quotes usually take about five minutes once we walk the property. For a fast starting estimate, try our paver sealing cost calculator.